SRX 2WD V8-4.6L VIN A (2004)
CD Changer: Service and Repair
REMOTE CD CHANGER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the radio.
2. Remove the screws that retain the remote CD changer to the radio.
3. Disconnect the electrical lead from the radio to the CD changer and remove the changer from the vehicle.
INSTALLATION PROCEDURE
1. Position the remote CD changer to the radio and connect the electrical lead.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the retaining screws that secure the CD changer to the radio.
Tighten
Tighten the screws to 2.5 N.m (22 lb in).
3. Connect the electrical/audio and coaxial cable connectors to the radio.
4. Install the radio.