SRX 2WD V8-4.6L VIN A (2004)
1. Connect the electrical connector.
2. Install the speaker onto the door frame.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screws (3) securing the speaker (2) to the door frame.
Tighten
Tighten the screws to 2 N.m (18 lb in).
4. Install the door trim panel.
Speaker Replacement - Rear
SPEAKER REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the body side trim panel.
2. Remove the fasteners (2) securing the rear speaker.
3. Disconnect the electrical connector.
4. Remove the speaker.
INSTALLATION PROCEDURE