SRX 2WD V8-4.6L VIN A (2004)
1. Wipe the area with a clean lint-free cloth using a solution of isopropyl alcohol and water 50/50 mixture by volume.
Important: Do not touch the tape with your hands or allow the adhesive tape to come in contact with any dirt or foreign matter.
2. Peel the backing from the adhesive tape.
3. Align the pins on the backside of the emblem (1, 2) with the holes located in the grille (3).
4. Firmly press the emblem into place for 30 seconds in order to ensure proper adhesion of the emblem.