SRX 2WD V8-4.6L VIN A (2004)
Console: Service and Repair
Bracket Replacement - Console Floor
Bracket Replacement - Console Floor
Removal Procedure
1. Remove the center console.
2. Remove the rear end panel.
3. Remove the 8 bolts securing the rear base bracket to the console.
Installation Procedure
1. Locate the base bracket on the console.
Notice: Refer to Fastener Notice () in Service Precautions.
2. Install the 8 bolts securing the rear base bracket to the console.
Tighten the bolts to 9 N.m (80 lb in).
3. Install the rear end panel.
4. Install the center console.
Center Console End Panel Replacement (w/o DVD)