SRX 2WD V8-4.6L VIN A (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement - Body Side Rear Upper
Garnish Molding Replacement - Body Side Rear Upper
Removal Procedure
1. Remove the seat belt retractor guide bolt (1).
2. Remove the seat belt retractor anchor bolt (3).
3. Remove the garnish molding (1).
4. Slide the seat belt through the garnish molding.
Installation Procedure
1. Insert the seat belt through the garnish molding.
2. Insert the seat belt guide into the garnish molding.