SRX 2WD V8-4.6L VIN A (2004)
2. Prior to installing the sunshade assembly to the bottom of the sunroof frame, pull the sunshade material (1) approximately 75 mm (3 in) outward
from the assembly (2). Pull the material outward.
3. Position the sunroof/sunshade assembly to the sunroof frame.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the sunroof/sunshade assembly screws.
Tighten
Tighten the 6 screws to 5 N.m (44 lb in).
