SRX 2WD V8-4.6L VIN A (2004)
5. Install the drive tube retainer (3) to the rear track (5).
6. Align and position the cable assembly (1) cam pin to the cam block (2), located on the lower sunroof frame.
7. Position the track to the lower sunroof frame.
8. Loosely install the rear track assembly screws
9. Measure the tracks side-to-side to ensure that both tracks are parallel.
NOTE: Refer to Fastener Notice in Service Precautions.
10. Secure the track to drive tube retainers.
Tighten
Tighten the screws to 5 N.m (44 lb in).
11. Install the year sunshade assembly.
12. Install the rear sunroof vent window.