SRX 2WD V8-4.6L VIN A (2004)
INSTALLATION PROCEDURE
1. Install the seat cushion into the seat.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the rear seat cushion nuts (1) securing the seat cushion to the seat frame.
Tighten
Tighten the nuts to 24 N.m (18 lb ft).
3. Install the seat cushion nuts (1) securing the seat cushion to the seat frame.
Tighten
Tighten the nuts to 24 N.m (18 lb ft).