SRX 2WD V8-4.6L VIN A (2004)
2. Install the park brake release cable housing (2) to the park brake pedal assembly (1).
3. Install the park brake release cable (2) to the park brake release handle assembly (1).
4. Install the park brake release cable housing (3) to the park brake release handle assembly (1).
5. Install the park brake release handle assembly (1) to the knee bolster.
6. Notice: Refer to Fastener Notice in Service Precautions.
Install the park brake release handle mounting screws.
Tighten the park brake release handle mounting screws to 2 Nm (18 inch lbs.).
7. Install the knee bolster.