SRX 2WD V8-4.6L VIN A (2004)
5. Remove the EN 46328 (1) from the camshafts (2).
6. Install the crankshaft balancer.
7. Install the left camshaft actuator housing.
Camshaft Position (CMP) Actuator Oil Control Valve Replacement - Bank 2 (Left) Exhaust
Camshaft Position (CMP) Actuator Oil Control Valve Replacement - Bank 2 (Left) Exhaust
Tools Required
^
J39946 Crankshaft Socket
^
EN 46327 Timing Chain Retention Tool
^
EN 46328 Camshaft Holding Tool
Removal Procedure
