SRX 2WD V8-4.6L VIN A (2004)
Timing Cover: Service and Repair
Engine Front Cover Replacement
Tools Required
^
J38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system.
2. Remove the air outlet duct in order to gain access to the thermostat housing.
3. Remove the heater hose from the thermostat housing using a J38185.
4. Remove the coolant radiator hose from the thermostat housing.
5. If equipped, remove the afterboil coolant pump.
6. Remove the drive belt tensioner.
7. Remove the drive belt idler pulley bolt. Remove the drive belt idler pulley.
8. Remove the water pump pulley.
