SRX 2WD V8-4.6L VIN A (2004)
13. Disconnect the condenser tube from the condenser.
14. Remove and discard the O-ring.
IMPORTANT: Reposition the power steering cooler aside to aid in removing the condenser.
15. Reposition the power steering cooler.
16. Remove the condenser.
INSTALLATION PROCEDURE
1. If replacing the condenser, add the specified amount of PAG oil directly to the condenser. Refer to Refrigerant System Capacities.
2. Install the condenser.
3. Reposition the power steering cooler into position.
