SRX 2WD V8-4.6L VIN A (2004)
6. Remove the liquid line to thermal expansion valve (TXV) liquid tube quick connect fitting (1).
7. Disconnect the liquid line from the TXV liquid tube.
8. Remove the liquid line from the vehicle.
9. Remove and discard the O-rings from the liquid line.
INSTALLATION PROCEDURE
1. Install new O-rings onto the liquid line.
2. Install the liquid line into the vehicle.
3. Connect the liquid line to the TXV liquid tube.
4. Install the A/C quick connect fitting (1) to the liquid line.