SRX 2WD V8-4.6L VIN A (2004)
Housing Assembly HVAC: Service and Repair
HVAC Module Assembly Replacement
HVAC MODULE ASSEMBLY REPLACEMENT
TOOLS REQUIRED
-
J 39400-A Halogen Leak Detector
-
J 45689 A/C Quick Joint Tool
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Disconnect the negative battery cable.
3. Drain the coolant. Refer to Draining and Filling Cooling System in Cooling System.
4. Disconnect the inlet heater hose from the heater core.
5. Disconnect the outlet heater hose from the heater core.
6. Remove the quick connect fitting (1) from the liquid line.
7. Disconnect the A/C liquid line from the evaporator.
8. Remove and discard the O-rings.
9. Remove the quick connect fitting (1) from the suction line.
10. Disconnect the A/C suction line from the evaporator.
11. Remove and discard the O-rings.