SRX 2WD V8-4.6L VIN A (2004)
10. Remove the left body side trim panel.
11. Disconnect the electrical connectors from the auxiliary HVAC module.
12. Remove the air duct from the auxiliary HVAC module.
13. Remove the auxiliary HVAC module bolts from the vehicle.
14. Remove the auxiliary HVAC module from the vehicle.
INSTALLATION PROCEDURE
1. Install the auxiliary HVAC module to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the auxiliary HVAC module bolts to the vehicle.
Tighten
Tighten the bolts to 9 N.m (80 lb in).
3. Connect the electrical connectors to the auxiliary HVAC module.
4. Install the air duct to the auxiliary HVAC module.
5. Install the left body side trim panel.
