SRX 2WD V8-4.6L VIN A (2004)
Daytime Running Lamp: Service and Repair
FOG LAMP, TURN SIGNAL LAMP, DAYTIME RUNNING LAMP (DRL) ASSEMBLY AND/OR BULB REPLACEMENT
REMOVAL PROCEDURE
1. Remove the front air deflector.
2. For the right side only, remove the front fascia extension.
3. Remove the screws (1) that secure the lamp assembly to the front fascia.
4. Remove the lamp assembly from the vehicle.
5. Disconnect the electrical connector.
6. Remove the screws (1) that secure the cover to the back of the lamp assembly.
7. Remove the back cover of the lamp assembly.
8. Remove the bulb from the socket.
INSTALLATION PROCEDURE