SRX 2WD V8-4.6L VIN A (2004)
Steps 1-7
The numbers below refer to the step numbers on the diagnostic table.
3. This step tests each fuel injector resistance within a specific temperature range. If any of the fuel injectors display a resistance outside of the
specified value, replace the fuel injector.
4. This step determines if all of the fuel injectors are within 3 ohms of each other.
5. This step determines which fuel injector is faulty. After subtracting the highest and lowest resistance values from the average value, replace the
fuel injector that has the greatest resistance difference from the average.