SRX 2WD V8-4.6L VIN A (2004)
7. Disconnect the fuel filler hose (1) from the fuel tank.
8. Disconnect the filler vent tube (2) from the evaporative emission (EVAP) hose.
9. Remove the fuel filler tube from the vehicle.
INSTALLATION PROCEDURE
1. Position the fuel filler tube to the vehicle.
NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.
2. Connect the filler hose (1) to the fuel tank.
Tighten
Tighten the fuel filler tube hose c!amp (3) to 3.5 N.m (31 lb in).
3. Connect the filler vent tube (2) to the EVAP hose.
NOTE: Refer to Fastener Notice in Service Precautions.