SRX 2WD V8-4.6L VIN A (2004)
Ignition Coil: Service and Repair
Ignition Coil(S) Replacement - Bank 1
IGNITION COIL(S) REPLACEMENT - BANK 1
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Remove the ignition coil cover from the cam cover by lifting straight up.
3. Disconnect the ignition coil wiring harness electrical connector from the coil that needs to be replaced.
4. Remove the ignition coil retaining bolt.
5. Carefully remove the ignition coil.
INSTALLATION PROCEDURE
IMPORTANT: Ensure that the spark plug seals are in place when installing the ignition coil.
