SRX 2WD V8-4.6L VIN A (2004)
8.
Locate and remove the SIR fuse from the right rear fuse center.
9.
Pry the rear of the shifter trim plate up with a blunt tool to release the trim from the console.
10.
Pull upward on the trim plate.
11.
Disconnect the traction control electrical connector.
12.
Remove the trim plate.
13.
Remove the 6 screws (1) securing the console to the floor.
14.
Disconnect the right and left console harness connectors (1)
15.
Remove the console from the vehicle.
