SRX 2WD V8-4.6L VIN A (2004)
Seat Belt Retractor: Service and Repair
No.1 Rear Center
SEAT BELT RETRACTOR REPLACEMENT - NO. 1 REAR CENTER
REMOVAL PROCEDURE
1. Remove the seat.
2. Remove the left seat back.
3. Remove the seat back cover and pad.
4. Remove the latch release assembly.
5. Remove the head restraints.
6. Remove the head restraint guides.
7. Remove the seat belt retractor bolt (1) from the seat frame.
8. Lift the seat belt retractor out of the seat frame.
INSTALLATION PROCEDURE
1. Install the seat belt retractor into the seat frame.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the seat belt retractor bolt (1) into the seat frame.
Tighten
Tighten the bolt to 42 N.m (31 lb ft).
