SRX 2WD V8-4.6L VIN A (2004)
Cabin Temperature Sensor / Switch: Service and Repair
INSIDE AIR TEMPERATURE SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the knee bolster.
2. Disconnect the aspirator hose from the HVAC module.
3. Remove the inside air temperature sensor (2) from the I/P by gently prying outward.
4. Disconnect the inside air temperature sensor (2) electrical connection (1).
5. Disconnect the aspirator hose (3) from the inside temperature sensor (2).
6. Remove the inside air temperature sensor (2).
INSTALLATION PROCEDURE
