cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Automatic Transmission - 5L40-E|Page 6036 > < A/T - Fluid Leaks/Loss of DRIVE or REVERSE/Noises|Page 6031
Page 1
background image

Parking Pawl: Service and Repair
Automatic Transmission - 5L40-E

Parking Pawl Replacement

Removal Procedure

1. Raise and support the vehicle.   

2. Remove the transmission manual shift shaft nut.
3. Disconnect the shift linkage from the transmission.
4. Place the transmission in neutral by rotating the transmission shift shaft clockwise 2 clicks.
5. Remove the exhaust system.

6. Disconnect the propeller shaft coupler (1) from the transmission flange.
7. Push the front propeller shaft toward the rear of the vehicle in order to release the propeller shaft coupler (1) from the transmission flange.

8. Secure the front propeller shaft (1) to the shift control lever (3) with a piece of mechanics wire (2).
9. Remove the transmission fluid pan.   

10. Using two equally sized suitable blocks of wood and a suitable transmission jack positioned under the transmission pan area. Support the

transmission case on both sides with the wood blocks to prevent the transmission internal components from contacting the transmission jack.

11. Remove the transmission support.
12. Remove the extension housing.

Automatic Transmission - 5L40-E|Page 6036 > < A/T - Fluid Leaks/Loss of DRIVE or REVERSE/Noises|Page 6031