SRX 2WD V8-4.6L VIN A (2004)
This condition may be due to the rear window washer hose being disconnected, pinched/kinked at the headliner to lift gate connection located at the
upper RH corner of the lift gate hinge panel.
Correction 2
1.
Open the lift gate.
2.
Disconnect the washer hose and wiring harness grommet from the upper RH corner of the lift gate hinge panel.
3.
Carefully pull back the grommet to access the washer hose (1).
4.
Check the rear window washer hose (1). Ensure the hose is properly connected and NOT pinched or kinked.
5.
Connect the grommet to the upper RH corner of the lift gate hinge panel.
6.
Close the lift gate.
7.
Verify proper operation.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
