SRX 2WD V8-4.6L VIN A (2004)
Wiper Blade: Service and Repair
Wiper Arm Blade Replacement
WIPER ARM BLADE REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: The wiper blades need to be cycled to the mid-wipe position to prevent the wiper arms contacting the rear edge of the hood.
1. Cycle the wiper blades to the mid-wipe position on the glass.
2. Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm.
3. Bring the wiper arm out through the opening in the wiper blade.
INSTALLATION PROCEDURE
