SRX 2WD V8-4.6L VIN A (2004)
2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
4. Operate the wipers and check for proper operation.
Blade Element Replacement - Rear
BLADE ELEMENT REPLACEMENT - REAR
REMOVAL PROCEDURE
IMPORTANT: Replace the rear wiper blade element if it is removed from the wiper blade.
1. Remove the rear wiper blade from the rear wiper arm.
2. Remove the bottom claws (2) of the wiper blade (1) from the notches in the wiper blade element (3).
3. Pull the wiper blade element (3) out through the wiper blade claws (2).
INSTALLATION PROCEDURE
IMPORTANT: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to
contact the metal spline of the wiper blade element.