SRX AWD V6-3.0L (2010)
7. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
Repair Procedure
Use the appropriate terminal and follow the instructions in the J-38125 .
Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.
FCI (SIR)
FCI Connectors (SIR)
Removal Procedure
Note: The orange connector position assurance (CPA) must be released first to disconnect or to connect the connector.