SRX AWD V6-3.0L (2010)
Parking Assist Distance Sensor: Service and Repair
Front Object Alarm Sensor Housing Replacement
Front Object Alarm Sensor Housing Replacement
1. Remove the front fascia. Refer to Front Bumper Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia Replacement).
2. Disconnect the sensor harness.
3. Remove the sensor from the sensor housing.
The sensor housing must be painted if replaced. If reinstalled, painting will not be necessary.
Note: Do Not grind off alignment tabs.
4. Sand/grind sonic weld plastic residue from the fascia.