SRX AWD V6-3.0L (2010)
Parking Assist Distance Sensor: Service and Repair
Front Object Alarm Sensor Replacement
Front Object Alarm Sensor Replacement
Removal Procedure
1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia Replacement).
2. Disconnect electrical from the front object alarm sensor.
3. Lift the locking tabs on the housing and remove the front object alarm sensor.
Installation Procedure
Note: Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.
1. Paint the front object alarm sensor. Refer to Basecoat/Clearcoat Paint Systems (See: Body and Frame/Paint, Striping and
Decals/Paint/Application and ID/Basecoat/Clearcoat Paint Systems).
2. Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gauges ().
