SRX AWD V6-3.0L (2010)
Note: Do Not force the white clip rearward off the cable retainer as it has a locking feature that prevents this direction of movement.
11. On the same side, disengage the white sunshade guide clip from the drive cable retainer by carefully prying the clip upward with a small flat blade
screwdriver, to lift the clip over the ridge on the cable end.
Note: The sunshade will still be under tension when removed from the retaining tabs. Securing the sunshade crossbar at the rear sunshade bracket
will prevent the shade from recoiling into the housing. Adding a larger paper clip or small clamp may help hold the shade fabric out of the way.
12. With the shade now free from the cables, secure the shade front crossbar (1) against the rear sunshade bracket (2).
13. If the sunshade cables ends are forward in the frame track, it will be necessary to slide them rearward to position them within the width of the
guide extension.
