SRX AWD V6-3.0L (2010)
5. Install the cable guides tabs (1) located at each corner of the sunshade, lock in place.
6. Install the white plastic retainers, sliding the retainer over sunshade, lock in place.
7. Ensure that the sunshade cam is fully seated in the sunshade bracket and the sunshade slides smoothly.
8. Install the sunroof window. Refer to Sunroof Window Replacement - Rear (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof Window
Replacement - Rear).
9. Install the headliner. Refer to Headlining Trim Panel Replacement (With C3U) (See: Interior Moulding / Trim/Headliner/Service and
Repair/Headlining Trim Panel Replacement (With C3U))Headlining Trim Panel Replacement (Without C3U) (See: Interior Moulding /
Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (Without C3U)).
10. Verify the operation of the sunshade.