SRX AWD V6-3.0L (2010)
Seat Cushion: Service and Repair
Front Seat Cushion Cover and Pad Replacement
Front Seat Cushion Cover and Pad Replacement
Removal Procedure
1. Remove the front seat. Refer to Driver or Passenger Seat Replacement (See: Service and Repair/Removal and Replacement/Driver or Passenger
Seat Replacement).
2. Remove the front seat adjuster, if equipped. Refer to Front Seat Adjuster Replacement (See: Service and Repair/Removal and Replacement/Front
Seat Adjuster Replacement).
3. Remove the front seat outer adjuster finish cover. Refer to Driver or Passenger Seat Outer Adjuster Finish Cover Replacement (See: Service and
Repair/Removal and Replacement/Driver or Passenger Seat Outer Adjuster Finish Cover Replacement).
4. Remove the front seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement (See: Service and
Repair/Removal and Replacement/Driver or Passenger Seat Inner Recliner Finish Cover Replacement).
5. Remove the rear retainers on the seat cushion cover from the seat frame.
6. Disengage the J-channel retainers from the seat frame.
7. Disconnect the electrical connector, if equipped.
8. Disconnect the duct from the vent fan, if equipped.
9. Remove the seat cushion cover and pad (1) from the seat cushion frame as an assembly.