SRX AWD V6-3.0L (2010)
10. Remove the hog rings from the under side of the seat cover.
11. Pull the cushion cover (1) off of the pad (2).
12. When replacing the front passenger seat cushion, you must also replace the inflatable restraint passenger presence system. Refer to Inflatable
Restraint Front Passenger Presence Sensor Replacement (See: Restraint Systems/Air Bag Systems/Seat Occupant Sensor/Service and
Repair/Inflatable Restraint Front Passenger Presence Sensor Replacement).
Installation Procedure
1. Pull the vertical listing wires (1) rearward partially out of the trim cover (2) before placing the trim cover on the pad.