SRX AWD V6-3.0L (2010)
4. Remove the brake hose fitting bolt (1).
Note: Do not reuse the brake hose fitting gaskets.
5. Remove the brake hose fitting gaskets (2) and the brake hose (3).
6. Discard the brake hose fitting gaskets.
Note:
*
DO NOT use any air tools to remove or install the guide pin bolts. Use hand tools ONLY.
*
Install an open end wrench to hold the caliper guide pin in line with the brake caliper while removing or installing the caliper guide pin bolt.
DO NOT allow the open end wrench to come in contact with the brake caliper. Allowing the open end wrench to come in contact with the
brake caliper will cause a pulsation when the brakes are applied.
7. Using a backup wrench to hold the brake caliper guide pins stationary, remove the brake caliper guide pin bolts (1).
