SRX AWD V6-3.0L (2010)
Brake Rotor/Disc: Specifications
Front Brakes
Brake Rotor Diameter .................................................................................................................................................................... 345.00 mm (13.58 in)
Brake Rotor Discard Thickness* ........................................................................................................................................................ 27.00 mm (1.06 in)
Maximum Allowable Lateral Runout ................................................................................................................................................. 0.06 mm (0.002 in)
Maximum Allowable Scoring ............................................................................................................................................................. 1.50 mm (0.059 in)
Maximum Allowable Thickness Variation ....................................................................................................................................... 0.025 mm (0.001 in)
Rear Brakes
Brake Rotor Diameter .................................................................................................................................................................... 315.00 mm (12.40 in)
Rotor Discard Thickness * ............................................................................................................................................................... 21.50 mm (0.846 in)
Maximum Allowable Lateral Runout ................................................................................................................................................. 0.06 mm (0.002 in)
Maximum Allowable Scoring ............................................................................................................................................................. 1.50 mm (0.059 in)
Maximum Allowable Thickness Variation ....................................................................................................................................... 0.025 mm (0.001 in)
*
All brake rotors have a discard thickness dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the
rotor, replace any rotor that does not meet the discard thickness specification.