SRX AWD V6-3.0L (2010)
Brake Caliper: Removal and Replacement
Front Brake Caliper Replacement
Front Brake Caliper Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
3. Remove the brake hose fitting bolt (1).
Note: Do not reuse the brake hose fitting gaskets.
4. Remove the 2 brake hose fitting gaskets (2) from the brake hose fitting (3) and discard the gaskets.
5. Cap the brake hose fitting to prevent brake fluid loss and contamination.