SRX AWD V6-3.0L (2010)
5. Install the brake pipe fitting (1) to the rear brake hose and tighten to 19 Nm (14 lb ft).
6. Install the rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement (See: Body and Frame/Fender/Rear Fender/Rear
Fender Liner/Service and Repair).
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
