SRX AWD V6-3.0L (2010)
5. Install the parking brake rear cable and conduit (1) to the rear frame bracket.
6. Ensure the parking brake rear cable conduit locking tabs are fully engaged to the rear frame bracket.
7. Connect the right parking brake cable fitting to the parking brake intermediate cable connector.
8. Install the rear suspension support. Refer to Rear Suspension Support Replacement (AWD) (See: Body and Frame/Frame/Cross-Member/Rear
Cross-Member/Service and Repair)Rear Suspension Support Replacement (FWD) (See: Body and Frame/Frame/Cross-Member/Rear
Cross-Member/Service and Repair).
9. Install the parking brake shoes. Refer to Parking Brake Shoe Replacement (See: Parking Brake Shoe/Service and Repair).
10. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
11. Enable the parking brake cable adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable Adjuster
Disabling).
