SRX AWD V6-3.0L (2010)
Hydraulic Brake Booster Pump: Service and Repair
Power Brake Booster Auxiliary Pump Replacement (LF1)
Removal Procedure
1. With the engine OFF, apply and release the brake pedal several times until the brake pedal becomes firm to deplete the power vacuum brake
booster vacuum reserve.
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
3. Disconnect the power brake booster vacuum hose quick connect (3).
4. Release the power brake booster vacuum hose from the routing clip (2) on the power brake booster auxiliary pump.
5. Disconnect the power brake booster auxiliary pump electrical connector.
6. Release the power brake booster auxiliary pump electrical connector retainer from the pump bracket.
