SRX AWD V6-3.0L (2010)
5. Disconnect the power vacuum brake booster vacuum sensor electrical connector.
6. Remove the vacuum sensor (1) and power brake booster vacuum hose assembly from the power vacuum brake booster.
7. Release the spring clamp and remove the power brake booster vacuum sensor from the vacuum hose.
Installation Procedure
Note: A small amount of denatured alcohol may be used to ease assembly. Do not use soap.
1. Install the power brake booster vacuum sensor (1) to the vacuum hose.
2. Secure the spring clamp to the vacuum hose.
3. Connect the power vacuum brake booster vacuum sensor electrical connector.