SRX AWD V6-3.0L (2010)
Brake Fluid Level Sensor/Switch: Service and Repair
Brake Fluid Level Indicator Switch Replacement
Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Without draining the coolant and without disconnecting the hoses, remove and position aside the radiator surge tank. Refer to Radiator Surge Tank
Replacement (LF1) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and Repair/Radiator Surge Tank Replacement
)Radiator Surge Tank Replacement (LAU) (See: Engine, Cooling and Exhaust/Cooling System/Coolant Reservoir/Service and Repair/Radiator
Surge Tank Replacement).
Note: Lift the dash panel insulator slightly to remove the upper master cylinder heat shield nut.
3. If equipped with the master cylinder heat shield, remove the master cylinder heat shield nuts (1).