SRX AWD V6-3.0L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the wheel speed sensor bolt (1) and tighten to 9 Nm (80 lb in).
6. Install the rear suspension link. Refer to Rear Suspension Link Replacement - Upper to Lower Control Arm (See: Steering and
Suspension/Suspension/Service and Repair).
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle).