SRX AWD V6-3.0L (2010)
6. Disengage tension on the radiator outlet hose clamp (1) at the engine using BO-38185 - Hose Clamp Pliers.
7. Remove the radiator outlet hose (2) from the engine.
8. Remove the radiator outlet hose from the vehicle.
Installation Procedure
1. Install radiator outlet hose to the vehicle.
Note: Lubricate the inside diameters of the hose with clean coolant prior to installation.
2. Install the radiator outlet hose (2) to the engine.
3. Engage tension on the radiator outlet hose clamp (1) at the engine using BO-38185 - Hose Clamp Pliers.