SRX AWD V6-3.0L (2010)
Note: Lubricate the inside diameters of the hose with clean coolant prior to installation.
2. Install the heater outlet hose (2) to the heater core.
3. Install the heater outlet hose (2) to the engine.
4. Engage tension on the heater outlet hose clamp (1) at the engine using BO 38185 - Hose Clamp Pliers.
5. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement)
6. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill LF1) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair/Cooling System Draining and Filling (Static Fill))Cooling System Draining and Filling (GE 47716) (See: Engine,
Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining and Filling (GE 47716))Cooling System Draining and Filling
(Static Fill LAU) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining and Filling (Static Fill))
Heater Core Outlet Tube Replacement
Heater Core Outlet Tube Replacement