SRX AWD V6-3.0L (2010)
11. Remove the air conditioning condenser and air conditioning evaporator tube nut (1) at the frame rail.
12. Disengage tube retainers from body.
13. Remove the air conditioning condenser and air conditioning evaporator tube (2) from vehicle.
Installation Procedure
1. Install the air conditioning condenser and air conditioning evaporator tube (2) to the vehicle.
2. Engage tube retainers from body.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the air conditioning condenser and air conditioning evaporator tube nut (1) at the frame rail and tighten to 15 Nm (11 lb in).