SRX AWD V6-3.0L (2010)
7. Remove the air conditioning condenser and evaporator hose nut (1) at the air conditioning condenser and air conditioning evaporator tube.
8. Remove the air conditioning condenser and evaporator hose (2) from air conditioning condenser and air conditioning evaporator tube.
9. Remove the air conditioning condenser and evaporator hose nut (1) at the condenser.
10. Remove the air conditioning condenser and evaporator hose (2) from the condenser.
11. Remove the air conditioning condenser and evaporator hose (2) from vehicle.
12. Remove and discard all sealing washers.
13. Transfer the air conditioning pressure sensor if necessary.
Installation Procedure
1. Install new sealing washers. Refer to Air Conditioning System Seal Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C
Coupler O-ring/Service and Repair/Air Conditioning System Seal Replacement)