SRX AWD V6-3.0L (2010)
Power Steering Line/Hose: Service and Repair
Fluid Cooler Inlet and Outlet Hose Replacement
Fluid Cooler Inlet and Outlet Hose Replacement
Removal Procedure
1. Place drain pans under the vehicle.
2. Remove as much power steering fluid from the reservoir as possible.
3. Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair).
4. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover
/ Fascia/Service and Repair/Front Bumper Fascia Replacement).
5. Remove the bolt (4) from the power steering fluid cooler inlet and outlet hose bracket.
6. Disconnect the power steering fluid cooler inlet and outlet hose bracket from the body.
7. Compress the hose clamp and disconnect the power steering fluid cooler outlet hose (1) from the power steering fluid reservoir inlet pipe (2).
8. Compress the hose clamp and disconnect the power steering fluid cooler inlet hose from the power steering gear outlet pipe (3).