SRX AWD V6-3.0L (2010)
6. Compress the power steering fluid reservoir outlet hose clamp (1) and disconnect the power steering fluid reservoir outlet hose (2) from the power
steering pump (3).
7. Remove the power steering fluid reservoir outlet hose from the vehicle.
Installation Procedure
1. Position the power steering fluid reservoir outlet hose in the vehicle.
2. Compress the power steering fluid reservoir outlet hose clamp (1) and connect the power steering fluid reservoir outlet hose (2) to the power
steering pump (3).
3. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
4. Compress the power steering fluid reservoir outlet hose clamp (1) and connect the power steering fluid reservoir outlet hose (2) to the power
steering fluid reservoir (3).
5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power
Steering/Power Steering Bleeding/Service and Repair).
6. Clean any excess power steering fluid from the vehicle.