SRX AWD V6-3.0L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the check valve bracket fastener (1) and tighten to 9 Nm(80 lb in).
3. Install the check valve bracket fastener (2) and tighten to 58 Nm(43 lb ft).
4. Install the check valve pipe fasteners (1) and (2).
5. Tighten the check valve pipe fastener (1) to 23 Nm(17 lb ft).
6. Tighten the check valve pipe fastener (2) to 9 Nm(80 lb in).
7. Install the three-way catalytic converter. Refer to Three-Way Catalytic Converter Replacement (Service) (See: Catalytic Converter/Service and
Repair/Three-Way Catalytic Converter Replacement (Service)).
8. Install the secondary air injection pump pipe. Refer to Secondary Air Injection Pump Pipe Replacement (See: Secondary Air Injection Pump Pipe
Replacement).