SRX AWD V6-3.0L (2010)
3. Disconnect the evaporative emission line (1). Refer to plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel
Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
4. Disengage the evaporative emission line (1) from the plastic retainers (2) and remove the evaporative emission line.
Installation Procedure
1. Install the evaporative emission line (1) into the plastic retainers (2).
2. Connect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
